Query returned 1127 results.
Challenges of using Augmented Reality to support an efficient and error-free assembly in complex variant environments
Dausch, Valesko Cedrik (1);
Roth, Daniel (1);
Kreimeyer, Matthias (1);
Bohr, Sebastian (2) // 2023
As part of the digital transformation towards Industry 4.0, the tasks of staff on the shop floor are changing. Despite increasing automation, complex assembly steps still have to be carried out by ...
Circularity of plastics through ecodesign : the case of French WEEE
Nève, Nicolas (1); Charbuillet, Carole (2); Pompidou, Stéphane (3); Perry, Nicolas (2) // 2023
While innovation in waste treatment processes continue to advance, plastics are still often put aside in comparison to other materials. It is especially the case for WEEE-plastics: as they are ...
Continuous simulation of variations during the design of endless fiber reinforced composite structure assemblies
Stephan Freitag, Stefan Goetz, Sandro Wartzack // 2023
Using composite materials like endless fiber reinforced plastics offers numerous advantages. Nevertheless, the material properties of composite materials lead to new challenges in the manufacturing ...
Creating an open-source, low-cost composite feeder design to improve filament quality of high-performance materials to be used in Fused Filament Fabrication (FFF)
Øvrebø, Henrik H.; Koldre, Svein-Andre; Nesheim, Ole S.; Eikevåg, Sindre Wold; Steinert, Martin; Elverum, Christer W. // 2023
Composite filaments are getting increased attention in additive manufacturing (AM). More and better solutions for filament production are needed to assist researchers in discovering new materials ...
Current and potential applications of 3D printing in a general hospital
Eddous, Sayfeddine (1,2); Lamé, Guillaume (2); Decante, Benoît (1); Yannou, Bernard (2); Agathon, Antoine (1); Aubrège, Laure (1); Talon, Valérie (1); Dacosta-Noble, Éléonore (1) // 2023
3D printing is widely touted as a game changer in medicine and surgery, paving the way for point-of-care production of personalised medical devices. Nonetheless, to date, most reported applications ...
Data-driven smart manufacturing: case study of workforce management process in an Italian leather goods company
Pietroni, Giorgia;Marconi, Marco // 2023
Digitalization is one of the fundamental pillars of Industry 4.0. Within smart factories, Big Data Analytics systems play a key role in supporting the decision-making process of various stages of ...
DEMOCRATISING VIRTUAL REALITY WITH CRITICAL PEDAGOGY, DESIGN AND MAKING
Novoa, Mauricio; Alsinglawi, Belal // 2023
This paper narrates outcomes from an undergraduate first-year project-based learning studio in industrial design, which intends to democratize virtual reality and helps to rethink design education ...
Derive and integrate sustainability criteria in design space exploration of additive manufactured components
Mallalieu, Adam (1);
Martinsson Bonde, Julian (1);
Watz, Matilda (2);
Wallin Nylander, Johanna (3);
Hallstedt, Sophie I. (1,2);
Isaksson, Ola (1) // 2023
Additive manufacturing has the potential to decrease the climate impact of aviation by providing more light-weight designs. Sustainability is however required to be assessed from a systemic view, ...
Design and development of a low-cost pediatric videolaryngoscope
Londoño, Maria José (1); Arango, Jose Fernando (2); Isaza, Juan Felipe (1) // 2023
Endotracheal intubation is performed to provide ventilatory support to a patient of any age. Every medical procedure that requires general anesthesia requires intubation, and for this reason, it is a ...
DESIGN AND ENGINEERING IN ACADEMIA: LEARNING FROM PRACTICE
Curralo, Ana Filomena; Curado, António; Nunes, Leonel; Lopes, Sergio Ivan // 2023
Design is a creative and innovative process that takes advantage of engineering's technical knowledge to develop products, services, and benefits for a consumption-driven society. This article ...
DESIGN DESCRIPTIONS IN THE DEVELOPMENT OF MACHINE LEARNING BASED DESIGN TOOLS
McKay, Alison;
Hazlehurst, Thomas A;
de Pennington, Alan;
Hogg, David C // 2023
Applications of machine learning technologies are becoming ubiquitous in many sectors and their impacts, both positive and negative, are widely reported. As a result, there is substantial interest ...
Design optimization for environmental sustainability: a framework to select the best eco-design strategy
Cappelletti, Federica;Manuguerra, Luca;Rossi, Marta;Germani, Michele;Sartini, Mikhailo // 2023
Environmental sustainability represents an unavoidable design driver. The consciousness of the importance of tackle the topic of environmental sustainability since the first stages of the product ...
DESIGN TEACHING INTEGRATING ADDITIVE MANUFACTURING CONSTRAINTS
Kromer, Robin (1);
Gruhier, Elise (2) // 2023
Additive manufacturing (AM) processes are now integrated in industry. Therefore, new methods to design AM parts taken into consideration capabilities and limitations are necessary. It is very ...
Designing business models for a circular economy
Scholtysik, Michel (1);Rohde, Malte (1);Koldewey, Christian (1);Dumitrescu, Roman (1,2) // 2023
The megatrend sustainability will significantly change the future value creation of manufacturing companies. Their current linear value creation models need to change to conform to the requirements ...
Development Of A Virtual Experiment To Validate The Relationship Between Engineering Changes And Learning Curves Using Design Structure Matrices
Cas M.G. Verstappen, Alex Alblas, Pascal Etman // 2023
The increased demand for high-performing engineered products pushes manufacturing firms to introduce novel and more complex products at an ever-faster pace. This invokes major engineering changes in ...
DevOps for Manufacturing Systems: Speeding up Software Development
Blüher, Till (1); Maelzer, Daniel (2); Harrendorf, Jessica (2); Stark, Rainer (1) // 2023
The increasing importance of software as an essential functional provider in products and processes requires that companies master the development capabilities to continiously and quickly deliver ...
DIGITAL TECHNOLOGY IN ENGINEERING DESIGN TEACHING
Valentine, Rod; Matthews, Jason // 2023
The aim of this paper is to appraise the use of digital technologies in the teaching of design. The continuing growth of digital technology in industry is difficult to ignore with, for example, the ...
Elements of a Prescriptive and Adaptive Prosthesis Development Service Framework
Patiniott, Nicholas (1);
Borg, Jonathan C. (1);
Francalanza, Emmanuel (1);
Zammit, Joseph P. (1);
Vella, Pierre C. (1);
Gatt, Alfred (1);
Paetzold, Kristin (2) // 2023
Amputees face a number of challenges when acquiring and using a prosthesis, with major issues being the cost of the device, the time it takes for their custom prosthesis to be developed and ...
Embedding perception: how changes in manufacturing approach influence interaction-design preferences
Urquhart, Lewis;
Wodehouse, Andrew // 2023
This paper explores how small-but–detectable changes in manufacturing protocol can alter interaction-design preferences for users. Building on a number of previous studies by the authors, this paper ...
Environmental labeling of electrical electronic equipment (EEE) in France: information for consumers
Bertrand, Axelle Noémie (1,2); Bauer, Tom (3); Charbuillet, Carole (3); Bonte, Martin (2); Voyer, Marie (2); Perry, Nicolas (1) // 2023
The current regulatory framework for Electrical and Electronic Equipment (EEE) is changing and now requires manufacturers to disclose the environmental performance of their products. This means that ...
Exploring the potential for a FEA-based Design of Experiments to develop design tools for bulk-metal joining processes
Hatherell, Jacob (1);
Marmier, Arnaud (1);
Dennis, Grant (2);
Curry, Will (2);
Matthews, Jason (1) // 2023
Over the last 20 years, finite element analysis (FEA) has become a standard analysis tool for metal joining processes. When FEA tools are combined with design of experiments (DOE) methodologies, ...
Feature-based method to formalise additive manufacturing related data at the mesoscale based on a mereotopological description
Douin, Chloe (1);Gruhier, Elise (1);Kromer, Robin (2);Christmann, Olivier (3);Perry, Nicolas (1) // 2023
Research on additive manufacturing has highlighted methods and guidelines to optimise the design process and improving finished product quality. There is still room for improvement in making AM as ...
File format selection for efficient digital process chains in additive manufacturing
Krueckemeier, Slim;
Anderl, Reiner;
Schleich, Benjamin // 2023
Selecting a suitable file format for data exchange in additive manufacturing is fundamental when designing these digital process chains. Within the scope of this investigation, alternatives to the ...
Framework for Comparison of Product Carbon Footprints of Different Manufacturing Scenarios
Winter, Sven;
Quernheim, Niklas;
Arnemann, Lars;
Anderl, Reiner;
Schleich, Benjamin // 2023
The Product Carbon Footprint (PCF) has been established over the last few years as a new control variable in product design to quantify the sustainable impact of a product. However, the calculation ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.